8/2/2023 0 Comments Mudroom drop zoneWhen the drop-zone bench goes in place against the wall, secure it to the studs through both the upper and lower back braces.Just above the baseboard notch on the backside of the legs, add a 1-by-2 brace between the legs with wood screws.Use a countersink bit to drill a pilot hole, and secure this joint with 2-inch screws to give the bench both vertical and lateral strength. Add 2-inch-wide braces directly under the seat, between the legs at both the front and back of the bench.Leave a 3/4-inch overhang outside each leg. Attach the seat to the legs with finishing nails.Trim down the width of the legs by about an inch from their stock width of 11-1/4 inches. Notch the two legs on the backside to accommodate the baseboard and allow the bench to rest against the wall.We’re using 1-by-12 pine shelving that has been primed and painted. Ours is about 48 inches wide and 17 inches high. Note: The width of your drop-zone bench will depend on the size and number of baskets you plan to store beneath it. It also adds storage for all kinds of things, especially shoes and boots that might otherwise end up tossed around in the middle of a room.Īdding labels can be the perfect addition to your new storage bench!įollow these instructions to build a drop-zone bench and boost your home’s storage. The drop-zone bench serves two functions to make your home operate more smoothly: it provides a seat for people entering the house, letting guests take a load off immediately upon entry. Lighted Magnifying Glass That Stays PutĪ bench with baskets underneath makes the perfect drop zone addition for any garage or mudroom.Single vs Double Vs Triple Pane Windows.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |